Met One Instruments’ BT‐645 Portable Dust Monitor has been designed to continuously measure and record particulate information for indoor work place and public space environments. Our BT-645 optical sensor, matched electronics and backlit display, are enclosed in a rugged metal enclosure to protect the instrument during normal daily use.
Supplied accessories:
User Manual, USB Cable, Communications Software (Comet), AC Adapter / Battery Charger and NIST Certificate of Calibration
Met One Instruments’ BT‐645 Portable Dust Monitor has been designed to continuously measure and record particulate information for indoor work place and public space environments. Our BT-645 optical sensor, matched electronics and backlit display, are enclosed in a rugged metal enclosure to protect the instrument during normal daily use.
Supplied accessories:
User Manual, USB Cable, Communications Software (Comet), AC Adapter / Battery Charger and NIST Certificate of Calibration
PERFORMANCE | |
Concentration Range | 0 to 100 mg/m3 (0 to 100,000 µg/m3) |
Sensitivity | 1 µg/m3 |
Accuracy | 5% traceable to standard with 0.6 µm PSL |
Measuring Time | 1, 5, 10, 15, 30 and 60 minutes |
Flow Rate | 2 LPM Note: Measurement accuracy requires use of appropriate K-factor for the material being measured. |
ELECTRICAL | |
Light Source Power | Laser diode, 5 mW, 670 nm |
Battery Life | 14.8V Li-ion (Lithium Ion) battery pack |
AC Adapter/Charger | Over 10 hours continuous operation |
Communications | Li-ion battery charger, 100 – 240 VAC, 50/60Hz to 16.8 V @ 1.8 A RS‐232, USB |
Data Storage | Over 28,000 samples |
PHYSICAL | |
Weight | 3.7 lbs (1.7 kg) |
Size | Height = 4.25” (10.8 cm) Width = 7.44” (18.9 cm) Thickness = 3.25” (5.4 cm) |
ENVIRONMENTAL | |
Operation Temperature | 0° to +50°C |
Storage Temperature | -20° to +60°C |
Relative Humidity | 90% (non‐condensing) |
INTERFACE | |
Display | 20 character x 4 line LCD |
Keyboard | 6 key membrane type |
PM 2.5 Sharp Cut Cyclone for BT-645 Dust Monitor
Learn More
PM 10 Sharp Cut Cyclone for BT-645 Dust Monitor
Learn More
PM 1.0 Sharp Cut Cyclone for BT-645 Dust Monitor
Learn More
The Si-K25 and Si-K85 are airflow measurement cones designed for 100 mm diameter vane anemometers. These models feature a honeycomb-structured airflow straightener that reduces turbulence for more reliable flow measurement.
The Si-K25 and Si-K85 are perfectly suited to Kimo LV 110 and LV 130, VT 210, MP 210 and AMI 310 anemometers.
The Si-K85 square cone can be used with medium-sized air vents.
The Si-K25 round cone is designed for small and medium-sized round vents.
Airflow Cones Ø 100 mm Vane Anemometers
Download Datasheet : Airflow Cones
Learn MoreRM1,980.00
Download Datasheet : Sauermann Si-VH3
Learn MoreConnection cable between the transmitter and:
Connection cable between the transmitter and:
Interchangeable VOC probe. Plastic body, Ø 29.5 mm, length: 175 mm. Autolock connector. Probe cable for connection to
class 320 transmitters is needed. Supplied with mounting flange and adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable CO probe. Plastic body, Ø 29.5 mm, length: 175 mm. Autolock connector. Probe cable for connection to class 320 transmitters is needed. Supplied with mounting flange and adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable CO2 probe. Plastic body, Ø 29.5 mm, length: 175 mm. Autolock connector. Probe cable connection to class 320 transmitters
is needed.. Supplied with mounting flange and adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable hotwire probe for air velocity and temperature measurements. Stainless steel body length 267 mm, Ø 8 mm. Autolock connector. Supplied with adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable Pt100 temperature probe. Stainless steel sheath, dimensions: length 153 mm, Ø 6 mm. Autolock connector. Supplied with adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreRM1,680.00
Interchangeable hygrometry/temperature probe. Plastic body with stainless steel filter. Length 150 mm, Ø 13 mm. Autolocking connector. Probe cable for connection to class 320 transmitters is needed. Supplied with adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn More
Reviews
There are no reviews yet.