The Aerocet 531S is a full–featured, completely portable, battery operated, handheld mass monitor or particle counter. This unit provides particle counts or mass PM measurements as stored data logged values, real-time networked data, or printed results.
Supplied accessories:
Operation Manual, USB Cable, Communication Software (Comet), AC Adapter / Battery Charger, Iso-kinetic Sample Probe, Carrying Case, Zero Particulate Filter and NIST Certificate of Calibration.
The Aerocet 531S is a full–featured, completely portable, battery operated, handheld mass monitor or particle counter. This unit provides particle counts or mass PM measurements as stored data logged values, real-time networked data, or printed results.
Supplied accessories:
Operation Manual, USB Cable, Communication Software (Comet), AC Adapter / Battery Charger, Iso-kinetic Sample Probe, Carrying Case, Zero Particulate Filter and NIST Certificate of Calibration.
| MASS MODE | |
| Mass Concentration Ranges | PM1, PM2.5, PM4, PM7, PM10, and TSP |
| Sensitivity | High = 0.3µm, Low = 0.5µm |
| Concentration Limit Sample | 0 – 1,000 µg/m3 |
| Time | 1 minute |
| PARTICLE COUNT MODE | |
| Concentration Limit Sample | 0 – 3,000,000 particles per cubic foot (105,900 particles/L) |
| Time | 1 minute |
| Size Accuracy | ± 10% |
| Sensitivity | User selectable (0.3µm / 0.5µm) |
| Flow Rate | 0.1 cfm (2.83 lpm) |
| Particle Size Ranges |
High sensitivity: 0.3µm, 0.5µm, 1.0µm, 5.0µm and 10µm; Low sensitivity: 0.5µm, 1.0µm, 5.0µm and 10.0µm |
| ELECTRICAL | |
| Light Source | Laser diode, 90 mW, 780 nm |
| Battery Pack | 7.4V Li-ion battery pack |
| AC Adapter/Charger | Li-ion battery charger, 100-240 VAC, 50/60Hz, 0.2A |
| Communications | RS-232, USB |
| Certifications | Meets or Exceeds CE and ISO 21501 |
| Battery Life | 6 hours continuous operation. Up to 20 hours of typical (intermittent) operation. |
| INTERFACE | |
| Display | 16‐character × 4‐line LCD |
| Keyboard | 7-key membrane keypad |
| PHYSICAL | |
| Weight | 2.0 lbs – 32oz (0.9 kg) |
| Size | Height = 6.25” (15.9 cm) Width = 4.0” (10.2 cm) Thickness = 2.1” (5.4 cm) |
| ENVIRONMENTAL | |
| Operation Temperature | 0° to +50°C |
| Relative Humidity | < 95% (non-condensing) |
| Storage Temperature | ‐20° to +60°C |
Met One Wall / Tripod Mount for 321, 521, 526 and 531 Particle Counters. (Tripod not included)
Learn More
Portable Printer for use with Handheld Monitors
Learn More
Met One 9801 Flow Meter Kit for use with 804, GT-521, GT-526S, AEROCET-531S, 831
Learn More
Met One G3120 Temperature/Humidity Sensor
Learn More
The Si-K25 and Si-K85 are airflow measurement cones designed for 100 mm diameter vane anemometers. These models feature a honeycomb-structured airflow straightener that reduces turbulence for more reliable flow measurement.
The Si-K25 and Si-K85 are perfectly suited to Kimo LV 110 and LV 130, VT 210, MP 210 and AMI 310 anemometers.
The Si-K85 square cone can be used with medium-sized air vents.
The Si-K25 round cone is designed for small and medium-sized round vents.
Airflow Cones Ø 100 mm Vane Anemometers
Download Datasheet : Airflow Cones
Learn MoreRM1,980.00
Download Datasheet : Sauermann Si-VH3
Learn MoreConnection cable between the transmitter and:
Connection cable between the transmitter and:
Interchangeable VOC probe. Plastic body, Ø 29.5 mm, length: 175 mm. Autolock connector. Probe cable for connection to
class 320 transmitters is needed. Supplied with mounting flange and adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable CO probe. Plastic body, Ø 29.5 mm, length: 175 mm. Autolock connector. Probe cable for connection to class 320 transmitters is needed. Supplied with mounting flange and adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable CO2 probe. Plastic body, Ø 29.5 mm, length: 175 mm. Autolock connector. Probe cable connection to class 320 transmitters
is needed.. Supplied with mounting flange and adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable hotwire probe for air velocity and temperature measurements. Stainless steel body length 267 mm, Ø 8 mm. Autolock connector. Supplied with adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreInterchangeable Pt100 temperature probe. Stainless steel sheath, dimensions: length 153 mm, Ø 6 mm. Autolock connector. Supplied with adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn MoreRM1,680.00
Interchangeable hygrometry/temperature probe. Plastic body with stainless steel filter. Length 150 mm, Ø 13 mm. Autolocking connector. Probe cable for connection to class 320 transmitters is needed. Supplied with adjustment certificate.
Download Specsheet : Probe for Class320 Transmitter
Learn More
Reviews
There are no reviews yet.