Multifunction for VAC and IAQ applications
4 x analogue outputs
1 x RS-485 interface for Modbus RTU protocol
2 x inputs for external probes
For clean rooms, regulated environments and industrial VAC applications where an efficient regulation/monitoring
of the air parameters is needed, our Si-C320 transmitters provide reliable measurements and allow achieving compliance
with the strictest regulations.
Several models are available, it is possible to create your multifunction transmitter according to your needs on the last
page of this data sheet. Do not hesitate to contact us for more information.
More Model Available : Si-C320 Selection Guide
Learn MoreFor clean rooms, regulated environments and industrial VAC applications where an efficient regulation/monitoring
of the air parameters is needed, our Si-CPE320 transmitters provide reliable measurements and allow achieving compliance
with the strictest regulations.
Download Datasheet : Si-CPE320
Learn More
The palm-sized Sauermann Si-PM3 digital differential pressure manometer easily measures pressure.
Download datasheet : Sauermann Si-PM3
Learn MoreRM1,190.00
Differential pressure transmitter. Configurable range from -10, 000 / +10, 000 Pa. 0-10 V or 4-20 mA output with 24 Vdc/Vac power supply (active 3-4 wire). Without display.
Learn MoreRM1,080.00
4 Thermocouple channels module)
Learn More
RM988.00
RM1,980.00
Climate Conditions module
Learn More
RM1,980.00
RM5,680.00
Kimo’s MP 210 thermo-anemo-manometer with backlit graphic display.
Functions: pressure, temperature, air velocity and airflow
Supplied with pressure module (-10000 to 10000 Pa – 4 to 100 m/s),
Learn MoreRM5,680.00
RM6,150.00
Kimo’s MP 210 thermo-anemo-manometer with backlit graphic display.
Functions: pressure, temperature, air velocity and airflow
Supplied with pressure module (-500 to 500 Pa – 2 to 28 m/s)
Learn MoreRM6,150.00
Pressure Module from 0 to ± 10000 Pa
Learn More
RM1,515.00
Pressure Module from 0 to ±2000 mbar
Learn More
RM1,220.00
Pressure Module from 0 to ± 2500 Pa
Learn More
RM1,580.00
Pressure Module from 0 to ±500 Pa
Learn More
RM2,150.00
Pressure Module from 0 to ±500 mbar
Learn More
RM1,200.00
The MP 110 manometer uses piezoresistif sensor as its measuring element for accuracy and has a built-in velocity calculation. It measures pressure in different units with manual automatic calibration. It also has a HOLD function in minimum and maximum values. It has an adjustable auto shut-off, back-light and climatic parameters.
Learn MoreRM2,750.00
The MP 120 is a micromanometer with a modifiable climatic parameters and calculation for air velocity with a Pitot tube. It has a compact design, with an IP54 protected housing constructed out of ABS. It has a maximum pressure measuring capacity that ranges from -1000 to +1000 Pa, and a maximum air velocity measuring capacity of up to 40 m/s.
Learn MoreRM3,100.00
Diameter 3 mm, length 300 mm
Learn More
RM950.00
Diameter 6 mm, length 300 mm.
Learn MoreRM810.00
Diameter 6 mm, length 500 mm.
Learn MoreRM930.00
RM1,945.00
Diameter 8 mm, length 1250 mm
Learn MoreRM1,945.00
RM1,055.00
Diameter 6 mm, length 800 mm.
Learn MoreRM1,055.00
Key Features :
•Hygrometry, temperature, CO2, CO, air velocity, airflow, pressure, tachometry measurement (depending on model & probe)
•Expandable memory with micro-SD card
•2 inputs for Pt100 temperature (from -200 to +600°C)
•Up to 6 measurements simultaneously
•Large color display
Download datasheet : AMI 310 STD
Learn MoreThe newly redesigned Sauermann DBM 620 Air Flow Meter is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings from air vents.
Download Datasheet : Sauermann DBM620 Balometer
Learn More